Beskrivning
GAC-2 AES/EBU (10601) Balanced double shielded digital & analoge audio cable
En audiokabel från Gotham Audio Cable, Schweiz
GAC-2 AES/EBU
Purple – OD: 6 mm
Låg kapacitans: < 44 pF/m
Denna kabel har mycket bra prestanda. Lämplig kabel för balanserade konstruktioiner med XLR kontakter.
Men det går lika bra att skapa en obalanserad konstruktion med vad som ibland kallas semi-balanserad, där man använder RCA kontakter.
Då andvänds en signalledare för signalen och den andra till jord. I avsändarändan ansluter man skärmen till jord.
Digital Audio signals in the AES/EBU format require an interconnect cable with the correct construction.
A mismatch of the impedance, a too small conductor diameter (skin-effect) or an impedance change in a cable run will cause digital errors (jitter) which are causing costly problems on your digital recording.
We have found the stability of the impedance the most critical point on an AES/EBU cable and our solution is the ”Star-Quad” twisting of the two conductors with two PE-strands to hold the conductors always in place, even when the cable is being bent.
Together with our unique ”double Reussen shield” we have the perfect signal cable for AES/EBU Digital Audio without compromises in regard to flexibility and handling.
The GAC-2 AES is a low loss, flexible AES/EBU cable optimized for use with XLR-connectors or installations with long cable runs (>100m).
LFOC (Linear Crystal Oxygen Free Copper) higher grade copper at best standards for best performance.
This cable is also capable to be used for DMX or analog audio signals.
Construction: |
||
| 1 = Jacket: | PVC, Ø 6.0mm, purple | |
| 2 = Viscose fiber coat: | Counter wrapped to the shields | |
| 3 = Shield No. 1: | Bare copper wires (0.10mm) 100% coverage | |
| 4 = Shield No. 2: | Bare copper wires (0.10mm) 100% coverage | |
| 5 = Stabilisation: | PVC foil | |
| 6 = Cord (2): | ’PE’, quad twisted with two conductors | |
| 7 = Insulation: | Scum ’PE’, Ø 2.0mm, white and red | |
| 8 = Conductor: | Stranded tinned copper wires 7 x 0.25 mm (0.34mm²) 7x30AWG = 22 AWG | |
Technical Datas: |
||
| Conductor resistance: | < 60 ohm/km | |
| Conductor resistance: | 1 MHz: | 2 dB/100m |
| Capacitance: | 800 Hz: | < 44 nF/km |
| cond/cond: | < 105 nF/km | |
| Insulation resistance: | > 10 GOhm/km | |
| Impedance: | 110 Ohm | |
| Test voltage: | cond/cond: | 500 veff |
| cond/shield: | 2000 veff | |
| Temperature range: | flexi-installed: | -5° to +50° C |
| fix-installed: | -30° to +70° C | |
TIPS OM ATT ANSLUTA SKÄRMEN RÄTT
