Beskrivning
Coaxial PUR-SPK 2 x 2.5mm² (50150) speaker cable with Polyuretane Jacket
En audiokabel från Gotham Audio Cable, Schweiz
Denna artikel är en komplett rulle med 200 meter kabel
Gotham artikel nr: GAC-SPK , 50150, blue
CAB-GAC-SPK-200m
18,3 kg
Detta är en riktigt tungviktare för att ansluta till högtalarsystem.
Denna kabel kan användas i enkel utförande, dvs man ansluter pluspolen till själva ledaren (nr 6) och sammankopplar skärmarna (nr 3 & 4) till minuspolen.
Men ett andra alternativ är att att använda dubbla kablar och tvinna lite båda.
På detta sätt får man dessutom lägre resistans och högre effektmöjligheter.
Bild visar hur man ansluter detta.
Detta ger 2 x 5,0 mm²
Loudspeaker cables are transporting very high levels. In an ideal situation we want to have the lowest possible resistance between amplifier and speaker. In order to get closest to this figure, one should accommodate as much copper to the connector as possible to minimize the energy loss and the possible change of the sound performance of your system.
Using a cable with a too small diameter can result the copper to transport the energy to its saturation, which will first decrease the level of high frequencies (cable gets warm or even hot) and affect your sound level and quality. Gotham currently offers different speaker cable types which can be combined as single line, stereo line or Biphase lines and/or put together for lower resistance.
All PUR Gotham speaker cables are protected with ultra strong oil, heat and cold resistant polyurethan (PUR) jacket . The double layer copper strands for the outside line are built to keep a good flexibility and the stronger stranding of the center conductor (line) will keep the unwanted memory (bendings) to the minimum. Conductor 1 A&B and conductor 2 = 2×2,5mm2.
Conductors 1A&B are not considered shields! Perfect SPK cable for up to 1650 Watts per line.
Construction: |
||
1 = Jacket: | PUR, Ø 6.8mm, blue (dark) RAL5013 | |
2 = Separation: | PVC, Ø 6.1mm, white | |
3 = Conductor 1A: | Bare copper wires 25 x 0.25 | |
4 = Conductor 1B: | Bare copper wires (0.20mm) 25 x 0.25 = 1A & 1B = total 2.5 mm² | |
5 = Insulation: | PVC, Ø 4.0mm, red | |
6 = Conductor 2: | (OFC) Stranded bare copper wires 50 x 0.25mm (2.50mm²) 30AWG = 13AWG | |
Technical Datas: |
||
Center conductor resistance: | < 7.6 ohm/km | |
Outside line resistance: | < 7.6 Ohm/km | |
Capacitance: | cond/cond: | < 98 nF/km |
Test voltage: | cond/cond: | 800 veff |
Insulation resistance: | cond/shield: | > 200 MOhm/km |
Temperature range: | flexi-installed: | -5° to +50° C |
fix-installed: | -30° to +70° C | |
Maximum Watts load: | @ current 15.0 Ampere/Line | < 1650 Watt |