Beskrivning
AECO – THE SMART SOLUTION
High- purity copper (Tellurium Copper)
Concept
It can be assort with other standard XLR.
Non-coaxial conduction are able to use single point conduction while plug connect to jack.
Conductor between body isolate by PTFE insulator.
The conductor is made from high-purity tellurium copper without nickel plating.
By using highest quality of design techniques and material to provide customer who has “Hi-End” requirement.
Non-coaxial conduction are able to use single point conduction while plug connect to jack.
Conductor between body isolate by PTFE insulator.
The conductor is made from high-purity tellurium copper without nickel plating.
By using highest quality of design techniques and material to provide customer who has “Hi-End” requirement.
Levereras i en snygg förpackning.
Det medflöjer extra skruvar (torx T6).
Delivered in a nice package.
Extra screws (torx T6) are included.
Extra screws (torx T6) are included.
Description
Mechanical structure：
The insulator of the Male end is fixed to the body by assemble function.
The hollow pin is fixed to the PTFE insulator by assemble function.
The grounding is riveting to the body on the Male end
Contact pin for the Female end is fixed inside of PTFE insulator by assemble function.
The PTFE insulator of the Female end fixed on the body by latch function.
The body and the shell locked by screwing.
POM sleeve is fixed with end of shell by using screw.
The cable hole with sleeve is 8.5mm, without sleeve is 12.5mm.The design of the Female end does not come with button,
however, it is suitable with other standard XLR products which has button.
The insulator of the Male end is fixed to the body by assemble function.
The hollow pin is fixed to the PTFE insulator by assemble function.
The grounding is riveting to the body on the Male end
Contact pin for the Female end is fixed inside of PTFE insulator by assemble function.
The PTFE insulator of the Female end fixed on the body by latch function.
The body and the shell locked by screwing.
POM sleeve is fixed with end of shell by using screw.
The cable hole with sleeve is 8.5mm, without sleeve is 12.5mm.The design of the Female end does not come with button,
however, it is suitable with other standard XLR products which has button.
Material：
Contact pin:
Male – Tellurium copper (#C14500 / copper contains over 99%).
Female – Tellurium copper (#C14500 / copper contains over 99%).Ground pin:
Male – Brass alloy (#C3604).
Female – Tellurium copper (#C14500 / copper contains over 99%).Insulator: PTFE
Body:Brass alloy (#C3604).
Shell: Brass alloy (#C3604).
Sleeve: POM .
Screw: Iron.
Contact pin:
Male – Tellurium copper (#C14500 / copper contains over 99%).
Female – Tellurium copper (#C14500 / copper contains over 99%).Ground pin:
Male – Brass alloy (#C3604).
Female – Tellurium copper (#C14500 / copper contains over 99%).Insulator: PTFE
Body:Brass alloy (#C3604).
Shell: Brass alloy (#C3604).
Sleeve: POM .
Screw: Iron.
Finish：
AMI-1060S
Contact pin: 10u” Silver plating (no nickel base).
Shell ground pin:10u” Silver plating (no nickel base).
Body:
Male – Satin Nickel + Topcoat.
Female – 10u” Silver plating (no nickel base).
AMI-1060S
Contact pin: 10u” Silver plating (no nickel base).
Shell ground pin:10u” Silver plating (no nickel base).
Body:
Male – Satin Nickel + Topcoat.
Female – 10u” Silver plating (no nickel base).
Electrical Characteristics：
Contact resistance < 1.0 mOhm (It was test by Ami-1060.)
Contact resistance < 1.0 mOhm (It was test by Ami-1060.)
Dimension：
Biggest OD:18.9mm
Total Length:
Male: 46.0mm
Female: 59.5mm
Biggest OD:18.9mm
Total Length:
Male: 46.0mm
Female: 59.5mm
Packing：
Vacuum Bag(1 male & 1 Female/1Set)
Vacuum Bag(1 male & 1 Female/1Set)
Recommend soldering temperature:
Temperature Soldering Iron, please keep 400 °C within 10 second
Temperature Soldering Iron, please keep 450 °C within 05 second
Temperature Soldering Iron, please keep 400 °C within 10 second
Temperature Soldering Iron, please keep 450 °C within 05 second
Product production process comply with RoHS.
