Audio-Technica AT-LP5

Audio-Technica AT-LP5
Tillverkare: Audio-Technica
Modellnummer: AT-LP5
Tillgänglighet: 4 - 7 dagar
Pris: 4,990.00SEK
Exkl. moms: 3,992.00SEK
Antal:     - ELLER -   Lägg till i önskelista
Jämför

DIREKTDRIVEN SKIVSPELARE

AT-LP5

DIRECT DRIVE TURNTABLE - direkt driven skivspelare

  • Många konsumenter anser att en direktdriven spelare är det bästa. Motorn har full kontroll över hastigheten och driver på ett tydligt sätt. Monterad med MM pickup AT95Ex
  • Skivspelaren har inbyggd RIAA (phono) steg, vilket innebär att man kan ansluta denna direkt till en förstärkare utan särskild RIAA steg.
    Men man kan även gå förbi denna och ansluta via separat RIAA steg.
    Möjlighet att via USB port rippa direkt till datorn, dvs digitalisera skivorna.
  • MYCKET PRISVÄRD SKIVSPELARE

Flerfaldig testvinnare, läs test hos Ljud & Bild som utsåg AT-LP5 till Best i test

Läs en instruktion hur du installerar en AT-LP5

 

  • PERFORMANCE IN TECHNOLOGY, PURITY IN DESIGN

    A perfect balance of technology and design, the sleek contemporary lines of the AT-LP5 turntable grace any room in the home, while delivering performance features born out of Audio-Technica's rich analogue heritage.

  • Specially designed AT95Ex Dual Moving Magnet stereo cartridge
  • Twist-locking tonearm mechanism for quick and easy headshell exchange
  • J-shape tonearm referencing the original 1960's and 70's Audio-Technica design
  • Precision machined cast aluminium record platter for perfect on-axis balanced rotation
  • 5mm Audio-Technica heavy damping rubber mat for improved low-frequency reproduction
  • Ergonomic Start/Stop and speed selector with 33⅓ & 45 RPM selectable speeds
  • Adjustable counterweight and anti-skate control for perfect problem free plaing
  • Anti-vibration and damping materials used to minimise unwanted resonance
  •  
  •  
  •  
  • AT95Ex Dual Moving Magnet stereo cartridge mounted on AT-HS10 Headshell
  • Original Audio-Technica J-shape design tonearm
  • Cast aluminium record platter
  • 5mm Audio-Technica heavy damping rubber mat
  • Sleek matt black surface finish
  • 33⅓ & 45 RPM selectable speeds
Turntable
Drive Method Direct drive
Type 2-Speed, fully manual operation
Motor DC motor
Speeds 33-1/3 RPM, 45 RPM
Turntable Platter Die-cast aluminium
Starting Torque >1.6 kgf.cm
Braking System Electronic brake
Wow and Flutter < 0.2% WRMS (33 RPM)
Signal-to-Noise Ratio > 50 dB
Output Level “PHONO” (Pre-amp bypassed) - 3.5 mV nominal at 1 kHz, 5 cm/sec
“LINE” (Pre-amp engaged) - 150 mV nominal at 1 kHz, 5 cm/sec
USB Function A/D, D/A - 16 bit 44.1 kHz or 48 kHz USB selectable
Computer interface: USB 1.1 (or higher) compliant Windows XP, Vista or MAC OS X
Accessories Included Dust cover with mounting hardware; AC line chord; Dual RCA (male) to Dual RCA (male) stereo cable; 45 RPM adapter; USB cable; recording software (Audacity), cartridge alignment and overhang adjustment template
Cartridge & Stylus
Model AT95EX
Type VM Design Stereo Dual Moving Magnet
Output Voltage 3.5 mV (at 1 kHz, 5 m/sec)
Vertical Tracking Force Range 1.5 to 2,5 g (standard 2 g)
Stylus Shape Elliptical
Stylus Size 0.3 x 0.7 mil
Recommended Load Impedance 47,000 ohms
Weight 5.7 g
Replacement Stylus ATN95EX
Headshell
Model AT-HS10
Weight 10 g
Overhang Adjustment +/- 5 mm
Colour Black
Tone arm
Type Static balance J-shaped tonearm
Effective Length 247 mm
Overhang 17 mm
Maximum Tracking Error Angle Less than 2.3° at any point of the record
Stylus Pressure Adjustment Range 0 to 5 g
Applicable Cartridge Weight 15 - 20 g (including headshell weight)
Anti-skating Range 0 - 3 g

Skriv en recension

Ditt namn:


Din recension: Notera: HTML översätts inte!

Betyg: Dålig           Bra

Fyll i koden som visas i bilden nedan:



Butiken använder OpenCart
Lukase AB © 2017